CR35/CR45

Our 700c CR35/45 rims are designed to handle everything from fast & light bikepacking to chasing breakaways at your local road race. Optimized for wider road and gravel tires, our new HR/CR series has you covered regardless of what surface you’re riding on. Features a Lifetime Warranty.

Specs (front/rear)
Wheel Size: 700c, Tire Size: 28c – 45c
Hole Count: 24h/24h or 28h , Depth: 35mm/45mm, Width: 29mm. Inner Width: 24mm, Weight: 410g/470g

The combination of a 35mm deep CR35 rim in the front and a 45mm deep CR45 rim in the rear offers a wheelset with a slightly more compliant and maneuverable front end and increased stiffness and responsiveness in the rear. Your hands will thank you through those rougher sections and your power output will be top-notch.

We worked with a number of manufacturers to collectively produce S136 and P20 steel molds. These long lasting molds allow for the highest tolerances with the smallest possible parting lines. The result is a rim that comes out of the mold nearly blemish free. The mold release used flashes off and you’re left with a scratch resistant surface with the outer layer of resin preserved and the carbon fibers remain undisturbed. Our new layup uses several different types and thicknesses of prepreg which has allowed us to shave weight in low stress areas, while reinforcing the high stress areas.

The Details

The CR35/45’s add a bead hook to their design. The bead hook is essential for higher pressure applications as it prevents blowouts and securely seats the tire. Riders who want to run up to 80psi for pavement or hard-packed dirt should choose the CR35/45’s over the HR35/45’s. These rims can still be used in lower pressure applications but their internal width is better suited for more narrow tires.

CR35 (Hookless)

Front – 24h / 410g / ERD 572
Symmetric – 0mm Offset

CR45 (Hookless)

Rear Specs – 24h or 28h / 470g / ERD 550
Symmetric – 0mm Offset

CR35 / cr45 Intended Use

The narrower profile and added bead hook of our CR rims allows for use in higher pressure applications. The CR leans more towards the ‘skinny tire’ side of the spectrum, but shares the versatility of being gravel/ off road ready.

  • Road
  • Gravel
  • Cyclocross
Tire Size Suggested
Pressure Range (psi)
28c 50-85
30c 45-80
32c 40-70
35c 38-65
38c 33-60
40c 29-55
42c 25-50
45c 24-48

*based on 170lb rider

Featured Upgrade: BERD

Upgrade your next CR Mixer wheelset to Berd Spokes for added comfort and weight savings. Berd spokes are made from an advanced polymer called Ultra High Molecular Weight Polyethylene (UHMWPE). UHMWPE has 12 times the strength-to-weight ratio of steel and floats on water. This means that you can enjoy substantial weight savings, when your wheelset is laced using these spokes. We find the ride quality is slightly less stiff than some conventional spokes, so road riders desiring a high amount of wheel stiffness may prefer steel spokes.

*We modify all J-bend hub shells for Berd, however we do not modify straight pull. For modified hub shells, the hub shell warranty is void

To learn more about Berd visit our FAQ.

Lifetime Warranty

If you manage to break your rims while riding your bike, we will send you a replacement rim at no charge and you will just have to pay the shipping cost. If you damage your rims because of non-riding circumstances like melting your rims because it was sitting too close to your vehicle’s exhaust on a road trip, we’ll give you 50% off a replacement. This coverage lasts indefinitely to the original purchaser.

For more details or to submit a claim, check out our warranty page HERE.

HR35 / CR35 REVIEWS

My trip was amazing to start and was made incredible with the addition of my NOBL wheels. Light, responsive and most noticeably laterally stiff and precise on the descents-I couldn’t be more happy about how they performed over 350 miles and 33k of climbing through Umbrian and Tuscan farm roads and Strada Bianche.”

 

Michael F

HR35/CR35 Reviews

When building my newest drop-bar bikepacking rig, I needed a wheelset that could be reliable & have a large enough inner ID for more voluminous tires. While researching which wheelset to choose, Nobl was one of the companies that was on my list.

The process & support Nobl provided from my initial inquiry, further discussions, warehouse tour in Courtenay, BC, to picking up the finalized wheel build was unreal.

I’ve since taken the HR35 on pavement, gravel, doubletrack, and light singletrack. This wheelset has checked all the boxes for an “all-conditions” drop bar rig.

 

Mark D

Technical Support

Your wheelset is a high precision component that requires regular upkeep and maintenance to perform at its absolute best. Fortunately we’ve compiled resources that will be sure to help you with this process.

Built with the Best